Morsø 3142 Multi Fuel Stove With Squirrel Sides

It is perfectly natural that our discerning Keops log cabin customers will wish to enhance their cabin purchase by the inclusion of one of the finest wood burning stoves available.

Keops are proud to have teamed up with Morsø to adapt a range of stoves and accessories to work harmoniously and safely in a log cabin environment.

Morsø, a Danish Company have over 160 years of experience in the manufacture of the very highest quality wood burning stoves. Morsø have retained the time honoured tradition of making “Cast Iron” stoves rather than the cheaper “steel” equivalents often found in the market place today.  Morsø adopted the “Squirrel” as their casting mark and are the makers of the famous “Squirrel” stoves.

Morsø have superior technical expertise to provide wood burners with the ultimate combustion technology. The cross section of the stove (image) outlines the stoves combustion and connection airflow system. Cold air is drawn into the stove and heated as it passes through the cast iron channels.  The heated air washes the glass keeping it clean, clear and free of soot. The hot air also provides perfectly heated combustion air.  In addition the heated tertiary air aids secondary combustion of any smoke and gasses, increasing efficiency and reducing the environmental impact.

Cast iron has unique properties. All stoves want to expand as they get hot.  Cast iron is especially well suited to temperature change.  The stoves are constructed by bolted section and plates which are sealed with gasket materials.  As the Cast iron expands the gaskets material will cushion the expansion and thereby reduce stresses in the metal.  This is so much better for air tightness and integrity than “welded seam” steel stoves. Cast iron is highly resistant to overheating. The thickness of cast iron used in Morsø Stoves ensures that the stoves retain their heat for a long time. The ability of cast iron to distribute heat is high.  The heat from a Morsø cast iron stove always feels comfortable and pleasurable to be near. Castings are covered by the 10 year Morsø warranty.

• The collection of Morsø stoves for Keops use, all provide “convection” heat rather than “radiant” heat. This ensures that heat from the stove will circulate around the cabin rather than being confined locally to the stove.

• The Keops/Morsø stoves have been adapted by adjustment to baffles and by including adjust baffler heat resistant back panels to allow siting closer to cabin walls safely.

• The Keops/Morsø stoves have been adapted to ensure base temperature is kept to a minimum and work in conjunction with the glass hearth plate provided in the package.

• The Keops/Morsø stoves are selected for their elegantly designed glass panels in the doors to provide a good view of the fire and flames.

• The Keops/Morsø stoves provide heat output between 4kw – 5kw (depending on the model) which can be turned down in a very controllable manner. These sizes of stove do not need separate air intake from outside or air vents in the cabin.

How do I place an order?

A first stage payment of 25% is required at the time of order. You will receive an order confirmation, deposit invoice, plus a “What Happens Next” letter, a timetable of events, insulation fitting instructions (if applicable) & preservative treatment information.

An invoice for the balance of payment will be sent to you approximately 2 weeks prior to your cabin delivery. The balance payment is due Friday before the week of delivery.

How long is delivery time?

Bearing in mind that most of our cabins are being made fresh especially for you to your design requirements, we need a sensible time frame in which to process the order, design, schedule production, source correct high grades of raw materials, manufacture, package and transport.

At present this is reliably achieved in 8 weeks on average.

Do you provide an installation service?

We do offer an efficient installation service nationwide, although the majority of our customers take enjoyment from self-assembly and we are available to provide expert advice over the telephone or by email should the need arise. Read more about our construction service.

What if something is missing or wrong with my cabin?

Whilst we strive for perfection, sometimes (rarely) something goes wrong with your log cabin or a part is missing.

You can be sure that we will bend over backwards to get you out of a problem in the shortest possible time. We have several methods that can help us overcome difficulties.

We have thorough knowledge of log cabin construction and your design in particular, and will understand the problem.

We can often suggest a method of using another piece for the time being to allow the build to continue while we replace the part used.

There will always be several people to turn to within our organisation, all with experience in log cabin construction that can offer some assistance or advice.

We are contactable by phone or email and offer excellent before, during and after sales customer service and technical support.

We carry many spares in stock in Worcestershire, and if practically possible, will use express couriers and / or private cars to get the part to you.

Our lorries are loading in the factory every week so we can ensure that your part will be on the very next lorry.

Why not read some of our many log cabin testimonials and reviews.

Can I visit Keops in Evesham?

Our normal office opening hours are Monday to Friday, 9.00am to 5.00pm.

You are welcome to visit us here at Evesham by appointment.

Appointments will be offered at 9:30am and 2:00pm Monday to Friday (subject to availability).

More FAQ’s